Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Pomona, CA
Gate installation in Pomona usually starts around $1,800 for a basic single swing gate and climbs from there depending on material, automation, and how much work the existing posts need. Most Pomona homes we see were built before 1960, which means the gate job isn’t a clean slate – it’s working around settled concrete, rusted post anchors, and clay soil that shifts with every rainy season. We’re Ironcrest Gate Repair, and we’ve been doing gate work exclusively in Pomona since 2017. Call (833) 589-7839 for a free estimate on any gate project.
Why Pomona Homes Are Different
Pomona isn’t a city of new tract builds with uniform fence lines. Walk through Lincoln Park, the Historic Pleasanton area, or the streets around Ganesha Park, and you’ll find Craftsman bungalows and Spanish Colonial Revival homes with original iron and wood gates that have been swinging since the 1940s and 1950s. Those gates were built with materials and hardware you don’t find at the big box store – thicker gauge wrought iron, mortise and tenon wood joints, strap hinges that were forged, not stamped. Repairing them properly takes someone who recognizes what they’re looking at and won’t slap a modern bracket on a 70-year-old post and call it fixed.
The bigger issue under the surface is soil. Much of Pomona sits on clay that expands when wet and contracts during our long dry summers. Gate posts set decades ago without proper footings shift over time, which is why so many Pomona gates sag on one side or stop latching by mid-September. You can adjust the hinges, but until the post is reset or reinforced, the problem comes back. We account for that on every estimate.
Seasonally, the Santa Ana winds are rough on wooden gates, especially anything over six feet wide. Dry heat extracts moisture from boards and leads to warping and splitting. Winter rains do the opposite, swelling wood against metal frames and accelerating rust on iron hardware. Our repair and installation approach is built around these cycles, not against them.
Styles & brands we work with
Our Main Pomona Services
Most calls we get from Pomona fall into two buckets: a gate that won’t budge or a gate that’s automated and acting up. Here’s how each one works.
Gate Repair in Pomona
Repair work in Pomona spans everything from a dropped hinge on a 1950s driveway gate to a rusted-out post that’s no longer anchoring anything. Because so many homes here still have their original gates, our technicians spend real time assessing whether the hardware can be saved or if the post needs to be reset in new concrete. In neighborhoods off Garey Avenue and Holt, vehicle strikes are common – a gate gets hit, the frame twists, and the latch stops lining up. We straighten what’s safe to straighten and replace what isn’t. For the full scope of what repair covers in Pomona, see Gate Repair in Pomona.
Electric Gate Repair in Pomona
Automated gates fail for predictable reasons: control boards take a hit from transient voltage, loop detectors stop sensing a car, or the motor’s capacitor finally gives out after years of heat. Pomona’s hot summers are hard on electronic components mounted in unshaded metal boxes. If your gate opens on its own, won’t respond to the keypad, or beeps without moving, that’s our world. We work on LiftMaster, FAAC, BFT, Linear, and five other major brands, residential and commercial. Read more at Electric Gate Repair in Pomona.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Pomona
A new gate in Pomona has to do two things: function through decades of clay-soil movement and look like it belongs on a house built before the interstate system. That’s the core of our Gate Installation work here. We set posts deeper than code minimums when soil conditions call for it, use hardware sized for the gate’s actual weight and swing radius, and build or specify materials that match the home’s character. Whether you’re replacing a rotted wood gate on a historic Craftsman or adding a sliding gate to a property on a busier street like Towne Avenue, the job starts with measuring what’s actually there, not what the catalog says should be there.
Automatic Gate Installation
Signs you need it
You’re getting out of the car every time to open and close a heavy gate, or you want controlled access to your driveway without a manual chain and padlock.
What it costs in Pomona
Automatic gate installation in Pomona typically runs $2,800 to $5,500 for a single swing gate with operator, while a sliding gate setup usually starts around $3,500.
How we do it
We survey the driveway approach and post condition, spec an operator matched to the gate’s weight and cycle needs, set or reinforce posts, mount the operator and safety edges, then wire and test the full system with you on-site.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is structurally failing, no longer matches the home after a renovation, or you have no gate and want to enclose the front access point.
What it costs in Pomona
Driveway gate installation in Pomona usually starts around $1,800 for a basic manual single swing gate and runs upward depending on material and width.
How we do it
We measure driveway width and grade, check the soil condition at each post location, set posts in concrete at the proper depth for Pomona’s clay, hang the gate, and adjust the hinges and latch for a clean close.
Sliding Gate Installation
Signs you need it
Your driveway slopes or has limited swing clearance, or you have a wider opening where a swing gate would eat too much space every time it moves.
What it costs in Pomona
Sliding gate installation in Pomona typically falls between $3,200 and $7,500 for the gate, track, and motor on an average driveway.
How we do it
We lay out the track line and end stops, pour or anchor the receiving foundation, set the gate frame and panels, align the rollers, then mount and program the operator if automation is part of the job.
What Gate Installation Costs in Pomona
| Item | Typical range in Pomona |
|---|---|
| Manual single swing gate (basic, installed) | $1,800 – $3,200 |
| Automatic single swing gate with operator | $2,800 – $5,500 |
| Sliding gate with track and motor | $3,200 – $7,500 |
How long does gate installation take in Pomona?
Most single gate installations take one full day, including post setting and concrete curing time for initial adjustment. Automated sliding gates or jobs requiring demolition of old concrete typically run two to three days.
Do I need a permit to install a gate in Pomona?
Most driveway gate installations on a single-family home don’t require a permit unless they include an automatic vehicle barrier facing a public street, which may trigger city review. We’ll tell you during the estimate if your specific project needs one.
Brands We Service in Pomona
Most Pomona driveways run one of a handful of operator brands, and we carry parts for all of them on the truck. LiftMaster and Linear dominate the residential side here, FAAC and BFT show up on larger properties and commercial entrances, and DoorKing is common on apartment and light-industrial gates. We stock common boards, remotes, edge sensors, and hinge kits locally, which cuts down the wait on second trips. See our brands for the full lineup.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Pomona, CA
| Service | Typical range in Pomona |
|---|---|
| Hinge replacement (wrought iron or wood) | $150 – $400 |
| Post reset or reinforcement | $300 – $800 |
| Gate realignment and latch adjustment | $125 – $300 |
| Wood gate repair (warped board or split frame) | $180 – $450 |
| Chain-link gate fabric replacement | $250 – $600 |
| Automated operator replacement | $900 – $2,200 |
| Control board replacement | $350 – $900 |
| Loop detector repair or replacement | $300 – $750 |
| Keypad or remote programming | $100 – $250 |
| Automatic gate installation | $2,800 – $5,500 |
| Driveway gate installation | $1,800 – $3,200 |
| Sliding gate installation | $3,200 – $7,500 |
What pushes prices higher in Pomona is usually what’s underground. Clay soil means post work sometimes requires deeper footings than a standard quote assumes, especially on gates that have already sagged once. Vehicle damage repairs can also expand scope once we see the full extent of the twist or weld crack. Every price is quoted and agreed before any work starts, and estimates are free.
Neighborhoods We Serve in Pomona
Our service area covers all of Pomona, from the historic districts through the mid-century tracts and up to the commercial corridors. We’re familiar with the gate conditions in each part of the city and typically reach any Pomona address within 45 to 90 minutes on a scheduled repair call.
- Lincoln Park and the Historic Pleasanton district
- Ganesha Park and surrounding streets
- Phillips Ranch
- Westmont
- North Pomona near La Verne
Service Area – Cities Near Pomona
Ironcrest Gate Repair works throughout the Pomona Valley and the surrounding foothill communities. We’re regularly on the road to La Verne, CA, Claremont, CA, Montclair, CA, and Los Serranos, CA. Each area has its own housing stock and gate profiles, and we bring the same brand familiarity and gate-specific diagnosis to every call.
Serving Pomona, CA — Our Local Coverage Area
We’re based in the Pomona area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Pomona
For urgent gate failures, we can usually reach Pomona addresses the same day if you call before early afternoon. Non-urgent installations and replacements are scheduled within a few business days. Emergency callouts are available any day of the week.
Some Pomona HOAs, especially in the newer sections of Phillips Ranch, do have architectural guidelines covering gate height, material, and color. If you have an HOA, we’ll review your governing documents with you and spec the gate to comply from the start.
We give you a straight read: if the post, frame, or operator is beyond sensible repair, we’ll show you the numbers for replacement and let you decide. We don’t push replacement when a repair that lasts is possible, and we don’t patch something that’s already failing structurally. Call (833) 589-7839 to set up a free estimate.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pomona Customers Say
"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Carmen Martinez"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Norma Garcia"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Craig Kowalski