Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Pomona
Electric gate repair in Pomona typically runs $180 – $340 for common operator and motor faults, with same-week scheduling for most residential calls and same-day response when a gate is stuck open or won’t close. We work across all four Pomona ZIP codes: 91766, 91767, 91769, and 91797. Call (833) 589-7839 for a free estimate and an honest read on whether your gate can be fixed or needs replacing.
Ironcrest Gate Repair is a gate-only shop. Every truck roll, every parts order, every diagnostic hour goes into automated and manual gate systems. When we pull up to a home in the Wilton Heights or Lincoln Park neighborhoods, the technician already knows the operator brands Pomona homeowners run: LiftMaster, FAAC, Linear, BFT, and the legacy systems that came with houses built before 1960. That matters when your gate is the only thing between the street and your backyard.
Why Ironcrest Gate Repair Is Pomona’s Preferred Electric Gate Repair Company
Pomona homeowners and property managers call us because we’re gate specialists, not generalists. We don’t split our week between garage doors, fencing, and gate work. Every diagnostic we run, every part we stock, and every training hour our techs log is in the gate industry. That singular focus means we’ve seen your operator model before, and we know its failure points before we open the panel.
Noel Ibarra leads the crew, and the standard he sets is straightforward: diagnose the actual problem, quote the repair before any work begins, and don’t sell a replacement when a retrofit makes sense. For Pomona’s older housing stock, that honest-advisor approach matters. A 1970s gate with a dead control board on a solid steel frame often deserves a board swap, not a full operator replacement. We’ll tell you which one makes sense, and we’ll stand behind the call.
Response time to Pomona is realistic and reliable. Most calls in the 91766 and 91767 ZIP codes get scheduled within two to three business days. A gate stuck open, a motor that won’t respond, or a safety risk gets faster handling. Licensed and insured, with free estimates and upfront pricing agreed before the first tool comes out.
Styles & brands we work with





Electric Gate Motor in Pomona
Electric gate motor repair in Pomona usually means one of three things: a motor that hums but won’t move the gate, a motor that trips its breaker mid-cycle, or an operator that runs but strains under load. On Pomona’s older properties, we often find the motor itself is fine and the real problem is a gate that’s out of plumb on shifted clay-soil footings, which forces the motor to work against binding. We check the mechanical load first, then the electrical side.
Motor repair costs in Pomona generally run $220 – $380 depending on the operator brand and whether the issue is mechanical binding, a capacitor, or a motor winding that’s given up. A full motor and operator replacement lands higher, and we’ll give you a written price before touching anything.
Operator Diagnosis and Load Testing
Before we condemn a motor, we test the actual amperage draw against the operator’s spec. A LiftMaster or FAAC motor pulling high amps on a gate that moves freely tells us the motor’s failing internally. The same reading on a gate that drags at the hinges tells us the fix is mechanical, not electrical. That distinction regularly saves Pomona homeowners hundreds of dollars.
Board, Capacitor, and Component Replacement
When the motor is healthy but the logic board is dead, we replace the board, not the whole operator. That’s a $180 – $260 repair on most residential systems, faster and cheaper than a full replacement. We stock common boards and capacitors for LiftMaster, Linear, and BFT systems so Pomona calls don’t wait a week for parts.
Gate Access Control in Pomona
Gate access control in Pomona covers everything that tells your gate who to let in: keypads, remote transmitters, loop detectors, intercom panels, and phone-based entry systems. On older Pomona gates, we frequently retrofit modern keypad entry and vehicle loop detection onto operators that predate those features, bringing the system up to current convenience and safety standards without scrapping the original operator.
Adding a keypad to an existing Pomona gate typically runs $280 – $520 installed. Vehicle loop detectors for a driveway gate land in the $350 – $600 range. For multi-unit properties and HOAs near Pomona’s older apartment corridors, we integrate access control with existing operator brands including FAAC and DoorKing, so the system works as one piece rather than a collection of add-ons.
Keypads and Remote Integration
When a Pomona homeowner asks for keypad entry, the first question is whether the existing control board has an open input for it. Most residential LiftMaster and Linear boards do. We wire the keypad to the board, program the codes on-site, and test the entrapment protection before we leave. The whole job usually takes under two hours.
Loop Detectors for Vehicle Entry
For gates that need to open automatically for arriving cars, we cut and install a vehicle loop in the driveway, wire it to a loop detector, and tie that into the operator’s open input. On Pomona’s older concrete and asphalt driveways, loop installation requires careful saw-cutting and sealing so the clay soil movement doesn’t crack the loop wire over time. We’ve done enough loops in Pomona to know the local soil demands a flexible sealant.
Trusted Brands We Service in Pomona
We’re certified to service nine major gate operator brands across residential and commercial categories. For Pomona customers, that means whether you’re running a LiftMaster on a mid-century tract home, a Linear on a 1990s swing gate, or a BFT or FAAC on a commercial access point, the technician in your driveway already knows the system. Not from a manual, but from the last dozen of them we opened this year. We stock boards, capacitors, limit switches, and safety edges for the residential workhorses locally, so most Pomona repairs don’t wait on a parts shipment.
That brand depth matters on older Pomona gates. A control board that’s been out of production for ten years still has a known failure mode and a known retrofit path. We’ve mapped them for LiftMaster, FAAC, BFT, Linear, and most everything else Pomona properties run. See our full Electric Gate Repair service details for what we cover.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Pomona Homes
- Obsolete control boards on legacy operators. Pomona’s pre-1990 homes often have gate operators whose logic boards haven’t been manufactured in years. When the board fails, the whole gate is dead. We stock and retrofit modern control boards with current safety logic, which brings the old operator back to life with entrapment protection it never originally had.
- Recurring sag and latch misalignment on clay soil. Pomona sits on expansive clay that swells in winter rains and shrinks in summer heat. Gate posts slowly rotate and sink, so a gate that cleared its latch in September can drag by January. The hinge adjustment is a band-aid; we reset the post footing so the problem stops cycling back.
- Santa Ana wind and dry-heat hinge wear. Hot, dry summers and seasonal Santa Ana winds bake the lubrication out of gate hinges and warp older wooden gates. We replace worn hinge pins, re-hang drifted gates, and use high-temperature grease that holds up through Pomona’s summer months.
- Entrapment protection that’s missing or non-functional. Many older Pomona gates were installed before current safety standards, which means no photocells, no reversing edges, and no force limits. We retrofit safety photocells and contact edges onto existing operators so the gate stops and reverses when a child, pet, or car is in its path.
Pricing for Electric Gate Repair in Pomona, CA
Here’s what Pomona homeowners can expect to pay for common electric gate repairs:
- Control board replacement: $180 – $260
- Gate motor repair: $220 – $380
- Keypad addition or replacement: $280 – $520
- Vehicle loop detector installation: $350 – $600
- Safety photocell retrofit: $160 – $300 per pair
- Post footing reset (clay soil sag fix): $400 – $750 depending on gate size and concrete work
Every price is quoted and agreed before work starts. No crew starts a Pomona job without a written number in hand. Estimates are free, and we’ll tell you plainly when a repair has become a money pit and a replacement operator is the cheaper path. Call (833) 589-7839 for an exact quote on your gate.
We Also Serve Cities Near Pomona
Ironcrest covers Pomona and the surrounding foothill communities. If your gate is in Pomona, we’re on it. We also run calls to La Verne, Claremont, Montclair, and Los Serranos, where the same older housing stock and clay-soil issues show up. Gate specialists, not generalists, wherever your driveway sits.
Serving Pomona, CA — Our Local Coverage Area
We’re based in the Pomona area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Pomona
A dead control board on an older Pomona operator can usually be retrofitted with a modern replacement board for $180 – $260, and that’s the right call when the motor and mechanical parts are still solid. If the motor is also failing or the operator lacks a retrofit-compatible frame, replacement becomes the cheaper long-term answer. We’ll test the whole system and give you both numbers. Call (833) 589-7839 and we’ll diagnose it on-site.
The recurring sag is a soil problem, not a hinge problem. Pomona’s expansive clay swells with winter moisture and shrinks in summer, slowly rotating and sinking gate posts. Adjusting the hinges or the operator just masks the movement. Until the post footing is reset or reinforced, the sag will come back every season. We do that footing work, and we’ve done it on gates from the Lincoln Park historic core to the 91767 tract neighborhoods.
Yes, and most Pomona gates built before the mid-1990s don’t have it. Current safety logic requires the gate to stop and reverse when it contacts something or breaks a photocell beam. We retrofit safety photocells and reversing edges onto existing operators for $160 – $300 per pair, which brings the gate up to standard without replacing the whole system.
Yes, and we do it regularly on Pomona gates, including older operators. A keypad adds $280 – $520 installed, and a vehicle loop detector runs $350 – $600. Both tie into the existing board’s open input. We program and test everything on-site, including the entrapment protection, before we hand you the code. Call (833) 589-7839 to schedule a free on-site look at your setup.
Yes, directly. Pomona’s hot, dry summers and Santa Ana winds dry out wooden gates, warp boards, and strip lubrication from metal hinges. Winter rains swell the wood and rust original hardware. Gates on pre-1950 Craftsman and Spanish Colonial homes in neighborhoods like Lincoln Park take the worst of it because the materials are decades old. We match repair techniques to the original material so the gate lasts through Pomona’s seasonal swings.
If your electric gate in Pomona is dead, drifting, sagging, or missing its safety features, call Ironcrest Gate Repair at (833) 589-7839 for a free estimate. We’ll tell you what’s wrong, what it costs to fix, and whether a retrofit beats a replacement. Gate specialists, not generalists.
Written by Noel Ibarra, Owner at Ironcrest Gate Repair, serving Pomona and surrounding cities.