Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Orange, CA
Gate installation in Orange runs $1,900 to $8,400 for most residential jobs, and $6,500 to $25,000+ for commercial work. We handle the full job from digging the post footings to wiring the operator and safety loops. What makes Orange different from the cities around it is the housing stock: a good share of the properties we work on date to the early 1900s, so we’re not just bolting a standard steel frame onto a fresh stucco wall. We’re matching period ironwork, working inside tight Old Towne setbacks, and designing around mature citrus trees that have been there longer than the driveway. Call (833) 589-7839 if you’re planning a gate and want a straight answer on what it’ll take.
Why Orange Homes Are Different
Orange’s Old Towne District has one of the densest concentrations of pre-1930 California bungalows and Spanish Colonial Revival homes in the county. That changes gate work in a practical way: many of those properties still have their original wood or wrought-iron gates, and the hardware is often non-standard, hand-forged, or sized to dimensions nobody manufactures anymore. When a 90-year-old iron hinge finally lets go, you can’t just grab a replacement off a shelf at a big-box store. We source or fabricate the match, and we do it in a way the city’s historic design guidelines will sign off on. Visible gate replacements in Old Towne often need to keep the period character, and we’ve learned how to retrofit modern openers into gates that were never built for them.
Outside Old Towne, the east side of Orange is mostly 1950s-to-1970s tract homes with standard steel or vinyl gates. Those are more straightforward, but they still deal with Orange’s hot, dry summers and mild winters. Wood gates dry out and crack. Metal gates in direct sun get surface rust faster than you’d expect. The heat also shortens the life of operator control boards and batteries. Every year we see gates in Orange that failed not because the opener wore out mechanically, but because a heat-faded capacitor or a sun-baked limit switch finally quit. That’s why we treat seasonal inspection as real maintenance, not a sales call.
Styles & brands we work with
Our Main Orange Services
The two calls we get most from Orange property owners are a gate that’s physically broken or sagging, and an electric operator that’s stopped responding. Here’s what each job looks like in this city.
Gate Repair in Orange
Repair calls in Orange split pretty evenly between older iron and wood gates in Old Towne and newer steel gates in the tract-home neighborhoods. On the old gates, we’re usually rebuilding hinge points, straightening sagging frames, or replacing rotted wood sections while keeping the original look. On newer gates, it’s often a wheel off its track, a bent post from a delivery truck, or a strike that stopped lining up. We diagnose on the first visit and give you a number before any work begins. For the full breakdown of what repair costs and how quickly we can get to you, see our Gate Repair in Orange page.
Electric Gate Repair in Orange
Electric gate troubleshooting in Orange usually starts with the operator, then moves to the accessories around it: loop detectors, keypads, safety edges, and the wiring between them. Heat is a real factor here. Control boards sit inside metal cabinets in full afternoon sun, and after enough 95-degree summers, solder joints and capacitors give out. We carry boards and parts for the mainstream residential brands and the commercial workhorses, so we’re often fixing the problem on the first trip rather than ordering and returning. Read the full list of symptoms and fixes on our Electric Gate Repair in Orange page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Orange
Gate installation in Orange means something different depending on where the house sits. In Old Towne, we’re often fabricating a gate that matches the home’s original character and the historic district guidelines, on a narrow lot where the footings have to be dug by hand and the posts set around tree roots. In the newer subdivisions east of the 55, the job is usually a clean, modern steel or aluminum gate with an automatic opener, done on a standard driveway with easy access. Both jobs share the same core: correct post depth, a properly aligned frame, and an operator sized for the gate’s weight and cycle count. If you want to look at the full scope of installation work, start on our Gate Installation page.
Automatic Gate Installation
Signs you need it
You’re getting out of the car to open and close the gate every time, or an older operator is loud, slow, and struggling to move a gate it used to handle easily.
What it costs in Orange
Automatic gate installation in Orange runs $1,900 to $5,500 for a single swing gate with a residential operator, and $3,200 to $8,100 for a dual swing; sliding setups run $2,000 to $6,100.
How we do it
We set and brace the posts, hang the gate, mount the operator and brackets, run the power from an existing circuit or arrange the electrical, and program remotes, keypads, and safety sensors before testing the full cycle.
Electric Gate Installation
Signs you need it
You’re building a new gate or replacing a manual one, and you want the operator wired in from day one instead of retrofitting it later.
What it costs in Orange
Electric gate installation in Orange runs $2,300 to $6,300 for residential work, and $4,000 to $12,000 or more for heavy commercial operators with high-cycle duty.
How we do it
We’ll come out for a free measure, check the gate weight and swing direction, confirm where the power will come from, and then install the operator, loops, safety edges, and controls as one connected system rather than bolting a motor onto a gate that was never prepped for it.
Driveway Gate Installation
Signs you need it
Your driveway is the one opening on the property that’s still unprotected or marked only by a chain, and you want a gate that actually fits the width and slope of the drive.
What it costs in Orange
Driveway gate installation in Orange runs $2,100 to $5,500 on a flat lot, and higher on sloped or narrow Old Towne lots where posts must be hand-dug and the gate custom-sized.
How we do it
We measure the opening and grade, dig and set posts to the right depth for the soil here, build or install the gate, and then mount and wire the operator with safety edges aligned to the finished position.
Sliding Gate Installation
Signs you need it
Your driveway slopes up from the street, swings into the house, or simply doesn’t have room for a swing gate to open without hitting a car, a wall, or a planter.
What it costs in Orange
Sliding gate installation in Orange runs $2,900 to $7,300 on a level run, and more when the track has to be built up to account for a sloping driveway.
How we do it
We set the track or cantilever posts, hang the gate so it travels smoothly under its own weight, and install the operator with the right horsepower and limit settings so the gate stops exactly where it should every cycle.
What Gate Installation Costs in Orange
| Item | Typical range in Orange |
|---|---|
| Automatic gate installation (single swing) | $1,900 – $5,500 |
| Electric gate installation (residential) | $2,300 – $6,300 |
| Sliding gate installation | $2,900 – $7,300 |
| Commercial gate installation | $6,500 – $25,000+ |
How long does gate installation take in Orange?
Most residential installs take one to two days once the gate is on site. Custom fabrication for larger or curved gates runs from a week to ten days, which we confirm before ordering.
Will the new gate need permits in Orange?
Many driveway gates in Orange need city approval, and Old Towne additions often require historic review. We’ll tell you early whether your project needs paperwork and what that timeline looks like.
Brands We Service in Orange
We work on the gate operators Orange actually has in the ground, including Linear and Viking on the residential side and BFT on the commercial and high-cycle side. Because gates are all we do, our techs know these systems’ common failure points without paging through a manual on your driveway. For the full brand list, see our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Orange, CA
| Service | Typical range in Orange |
|---|---|
| Gate repair (minor) | $150 – $400 |
| Gate repair (moderate) | $200 – $850 |
| Gate repair (major) | $850 – $2,800 |
| Electric gate repair | $275 – $2,100 |
| Automatic gate installation | $1,900 – $5,500 |
| Electric gate installation | $2,300 – $6,300 |
| Driveway gate installation | $2,100 – $5,500 |
| Sliding gate installation | $2,900 – $7,300 |
| Commercial gate installation | $6,500 – $25,000+ |
What pushes a job to the upper end in Orange is almost always the same three things: period hardware on Old Towne gates that has to be matched or fabricated, narrow lots where posts go in by hand, and commercial operators built for high traffic. Whatever the number, we quote it in writing before any work starts, and you approve it before we pick up a tool.
Neighborhoods We Serve in Orange
We work across the whole city, from the tree-lined streets of Old Towne to the gated communities and tract-home neighborhoods on the east side. Most Orange calls can be scheduled within a few days, and we’ll give you a real arrival window, not a four-hour guess.
- Old Towne Orange
- Orange Park Acres
- El Modena
- Mabury Park
- Bryan Avenue area
Service Area – Cities Near Orange
Ironcrest Gate Repair is based in Anaheim and runs calls throughout the surrounding cities. If you’re just over the border, we likely cover your street too. That includes our neighbors in Villa Park, CA, North Tustin, CA, Tustin, CA, and of course Anaheim, CA itself.
Serving Orange, CA — Our Local Coverage Area
We’re based in the Orange area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Orange
Most Orange repairs are scheduled within two to three days, and emergency calls are handled as they come in based on what “emergency” means for the property: a gate stuck open at a commercial lot is different from a noisy hinge on a side gate. Call (833) 589-7839 and we’ll give you the soonest honest time.
In Old Towne, visible gate replacements often require design review through the city’s historic preservation process, so plan for that lead time. HOA-governed communities elsewhere in Orange may have their own standards for gate height and finish. We’ll walk through approval needs on the first call so you’re not paying for work that can’t be installed.
No. We service both manual and automatic gates, including hinges, latches, posts, and structural repairs on gates that never had a motor. The operator is just one component; the gate itself is the system, and that’s the part we specialize in.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Orange Customers Say
"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
— Andres Flores"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Scott Norris"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Steve Delaney