Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Claremont, CA
Gate installation in Claremont means working with a housing stock that runs from 1910s Craftsman bungalows to mid-century ranches and newer planned communities near the foothills. We’re gate specialists, not generalists, so when we quote a new gate in the Village or off Indian Hill Boulevard, we’re looking at set-back requirements, existing post footings in clay soil, and how the gate will hold up to Santa Ana wind events. Most of our Claremont installs are replacements for gates that have already failed once, often because the original post was never set deep enough. Call us at (833) 589-7839 and we’ll measure, quote, and tell you straight whether repair or replacement makes more sense.
Why Claremont Homes Are Different
Claremont’s core neighborhoods are full of 1900s to 1940s homes with original wood picket, wrought-iron, and carriage-style driveway gates. These gates are 80 to 100-plus years old in many cases, and they were built for a different era. The wood has dried through decades of Inland Empire summers, the iron has been repainted so many times the hinges are gummed with layers, and the posts were set into clay soil that swells and shifts with the seasons. Add the mature coast live oaks and sycamores that line the older streets, and gate posts lean, bind, and pull loose as roots heave the ground around them. Intense summer sun dries wood gates until they warp. Santa Ana winds push unanchored gates hard enough to snap hinges and latches. A gate job in Claremont is rarely a simple swap; it’s a re-leveling, a re-plumbing, and a rebuild around vintage geometry. The city’s preservation sensibility in the Village means many homeowners want the original look preserved, so we match profiles and re-hang rather than pushing a modern prefab. That’s the work we do most here.
Styles & brands we work with
Our Main Claremont Services
The two calls we get most from Claremont homeowners are for gate repair and electric gate repair. Here’s what each involves here.
Gate Repair in Claremont
Gate repair in Claremont usually starts with a hinge or post problem. A wood gate that drags on the latch side has a post leaning out of plumb. A wrought-iron gate that won’t close all the way has sagged at the hinge barrels. We re-set posts in concrete, rebuild hinge points, plane and re-hang wood gates, and replace rotted sections with matching profiles. We work on residential driveway gates and pedestrian gates, and we know the vintage hardware on older Claremont homes because we’ve been servicing this area since 2017. Full details on what this service covers are on our Gate Repair in Claremont page.
Electric Gate Repair in Claremont
Automated gates in Claremont fail most often at the operator, the loop detector, or the keypad. When a gate opens halfway and reverses, the safety edge or photo eye has a fault. When it won’t respond to the remote, the receiver board or limit switch is the usual suspect. We service LiftMaster, FAAC, BFT, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, so we diagnose the actual brand in your driveway. Sudden power interruptions from Santa Ana wind events cook control boards more often here than in coastal cities. Read the full breakdown on our Electric Gate Repair in Claremont page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Claremont
Gate installation in Claremont is often a replacement job for a gate that can’t be economically saved. Older gates here, especially wood driveway gates from the 1920s through 1950s, reach a point where the framing is too far gone to rebuild. In other cases the gate works but the post footings have cracked and shifted so badly that starting fresh is the only honest fix. When that comes up, we handle it ourselves. No hand-off to a general contractor. We measure the opening, pull or cut the old posts, dig and set new footings to the right depth for Claremont’s clay soil, then build and hang the new gate. Whether you’re considering a new automatic driveway gate or a replacement pedestrian gate, our Gate Installation service covers the whole job from excavation to final hardware.
Automatic Gate Installation
Signs you need it
You’re replacing an existing manual gate with an operator, or your current automated gate has an operator that has failed repeatedly and is no longer worth repairing.
What it costs in Claremont
Automatic gate installation in Claremont typically runs from $750 to $2,250 for the operator and installation, with full automation packages starting at $4,000 when the gate itself is included.
How we do it
We set the gate and posts first, then mount the operator, run conduit and power, install the loop detector and safety edges, and program remotes and keypads on site.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is rotted, sagging beyond repair, or no longer matches the style of the home after a remodel or exterior update.
What it costs in Claremont
A new driveway gate in Claremont generally costs between $2,250 and $7,500 depending on material, width, and whether an operator is included.
How we do it
We measure the exact opening, remove the old gate and hardware, pour new footings sized for the gate’s weight and wind exposure, then hang and adjust the new gate to close true.
What Gate Installation Costs in Claremont
| Item | Typical range in Claremont |
|---|---|
| Pedestrian gate | $450 – $2,000 |
| Driveway gate | $2,250 – $7,500 |
| Automatic gate installation | $750 – $2,250 (operator + install) |
In Claremont, the biggest price drivers are post footing depth in clay soil, gates built to match historic home styles, and operators sized for heavy or wide driveway openings. Every job is priced and agreed to before we start.
How long does gate installation take in Claremont?
Most Claremont gate installations take one to two days on site. Custom wood or wrought-iron gates may need two to four weeks from order to install because the gate is built or fabricated to spec.
Do you handle the full install including posts and power?
Yes. We dig and pour new post footings, set the posts, hang the gate, and run power and conduit for operators. You don’t need a separate contractor for any part of the gate installation.
Brands We Service in Claremont
We stock common parts for Viking, Ghost Controls, DoorKing, and Elite operators, and we service the rest of our nine-brand portfolio with direct supplier access. That means faster diagnosis and fewer return trips. See the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Claremont, CA
| Service | Typical range in Claremont |
|---|---|
| Gate repair (minor hinge or latch) | $150 – $350 |
| Gate repair (post reset or structural) | $350 – $800 |
| Electric gate repair (board, receiver, or limit switch) | $225 – $550 |
| Operator replacement | $550 – $1,200 |
| Pedestrian gate | $450 – $2,000 |
| Driveway gate | $2,250 – $7,500 |
| Automatic gate installation | $750 – $2,250 (operator + install) |
| Full automation package | $4,000+ (gate, operator, safety equipment, installation) |
What pushes cost up in Claremont is usually the same thing that pushes it up valley-wide: clay soil that demands deeper footings, heavy vintage gates that need custom fabrication to match, and operators sized for wider custom openings. The price we quote is the price you approve before any work starts.
Neighborhoods We Serve in Claremont
We cover the entire 91711 ZIP and every part of Claremont, from the tree-lined streets of the Village up to the foothill-adjacent neighborhoods where wind exposure is worse. Most calls in Claremont can be scheduled within one business day for repair work.
- The Village
- Claremont Village Expansion
- Towne Ranch
- North Claremont foothills
- Stone Canyon
Service Area – Cities Near Claremont
Beyond Claremont, we serve the surrounding foothill and Inland Empire communities. That includes Montclair, CA directly to the south, La Verne, CA to the west, Upland, CA to the east, and San Antonio Heights, CA up against the San Gabriels. Same specialist team, same gate-only focus.
Serving Claremont, CA — Our Local Coverage Area
We’re based in the Claremont area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Claremont
We schedule most Claremont repair calls within one business day. Emergency calls are triaged based on whether the gate will not close and secure, which affects how we route the schedule.
Most residential gate replacements in Claremont don’t require a permit. The exception is when an automatic operator is added and the project falls under any current city electrical or zoning requirements.
Yes. We work with homeowners and HOA managers on both private driveway gates and community entry gates. Quotes are issued upfront, and we repair to the same standard we’d use on our own gate.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Claremont Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Scott Norris"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Steve Delaney"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Javier Rodriguez