Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Upland, CA
Gate installation in Upland runs $1,800 to $8,500 for most driveway projects, with electric gate installation adding operator and access-control costs. The work here differs from coastal cities because Upland’s mix of 1950s – 1970s ranches and hillside estates in 91784 sits directly in the Santa Ana wind corridor. Ironcrest Gate Repair has served Upland since 2017, and we stock hinge sets and operator gears specifically for the gust damage we see along the north-side tract streets every wind season. Call (833) 589-7839 for a free estimate on any gate project.
Why Upland Homes Are Different
Upland is an old citrus-belt city where post-WWII tract homes and newer foothill estates meet Santa Ana-wind exposure. Gate repair here often means re-engineering lightweight residential gates to survive seasonal 50+ mph gusts, a pattern that plays out differently than in sheltered neighboring cities. After a Santa Ana event you’ll find a cluster of bent driveway-gate arms and torn operators along the north-side tract streets where gates catch the funneled gusts. Technicians who work Upland regularly keep replacement hinge sets and operator gears stocked for those weeks precisely because the failure mode is predictable.
The housing stock compounds the problem. Many homes on the flats near the old downtown core are single-story ranches built between 1950 and 1975, with mass-produced steel driveway gates that have seen decades of heat, wind, and occasional retrofit attempts. The hillside residences in 91784 are a different story: custom wrought-iron and wood pedestrian gates, often retrofitted over decades, with footers that predate current drainage practices. Hot, dry inland summers dry out wood components and stress hinges. Winter rain then exposes poorly drained footer plates on older driveways. None of this is unique to Upland, but the combination of aging stock and wind exposure is. A gate that would last twenty years in Claremont can need real structural work after five good wind seasons here.
Styles & brands we work with
Our Main Upland Services
Two services account for most of the calls we take from Upland homeowners and property managers: repair work on existing gates, and repair work on the electric systems that automate them. Both are covered below, with dedicated Upland pages for each.
Gate Repair in Upland
Most Upland gate repair calls start with a hinge problem: a sagging leaf, a striker that no longer lines up, or a gate that scrapes the driveway after years of heat and wind. We work on the full gate, not just the operator. That means hinges, tracks, posts, weld points, and the structural components that wind events stress first. In Upland, a common pattern is a mass-produced steel driveway gate with one bent arm and a hinge side that has pulled away from the post after a Santa Ana. We tell you whether the hardware is worth repairing or whether replacement makes more sense. Gate Repair in Upland covers that service in detail.
Electric Gate Repair in Upland
Electric gate repair is a primary service for us, not an add-on. We diagnose the actual operator in your driveway: LiftMaster, Linear, Viking, Mighty Mule, Ghost Controls, Elite, FAAC, BFT, or DoorKing. Most Upland electric gate failures we see come from control boards, loop detectors, keypads, or motor assemblies that have been baked by inland heat and worked hard by wind resistance. A gate that fights a 45 mph gust draws more current than the same operator on a calm street. Electric Gate Repair in Upland explains what we fix and how we approach it.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Upland
New gate installation in Upland should account for wind from the start. We specify heavier hinge posts and properly sized operators on north-side tract streets where gusts funnel, then build to match the era of the home: painted steel for a 1960s ranch, wrought iron for a hillside property in 91784. For many Upland properties, the best decision after a major wind-season failure is a full replacement rather than a third round of repairs. That’s our Gate Installation practice in one line: repair or replace, and we’ll tell you which one makes sense.
Automatic Gate Installation
Signs you need it
You’re tired of getting out of the car to open the gate every day, or your existing automatic gate has failed enough times that continued repair no longer makes sense.
What it costs in Upland
Automatic gate installation in Upland typically runs $2,200 to $5,500 depending on operator type, gate weight, and access control needs.
How we do it
We measure the driveway, match an operator to the gate’s weight and wind exposure, install the operator and safety edges, then program keypads and remotes.
Driveway Gate Installation
Signs you need it
Your existing driveway gate sags past adjustment, shows structural weld cracks, or no longer matches a home you’ve renovated.
What it costs in Upland
Driveway gate installation in Upland typically runs $1,800 to $4,600 for a standard single-leaf steel gate on the flats, more for custom work in 91784.
How we do it
We set or reinforce posts to handle Upland wind loads, hang the gate leaf, align hinges and striker, and confirm the full swing path clears the driveway grade.
What Gate Installation Costs in Upland
| Item | Typical range in Upland |
|---|---|
| Manual driveway gate (single leaf) | $1,800 – $4,600 |
| Automatic gate with operator | $2,200 – $5,500 |
| Custom wrought-iron or wood gate | $4,500 – $8,500 |
Do I need an automatic or manual gate in Upland?
If your gate faces a north-side street with Santa Ana exposure, an automatic operator rated for wind resistance is worth the extra cost. Manual gates hold up fine, but you’ll be out of the car in the wind.
How long does gate installation take in Upland?
Most standard driveway gate installations in Upland are completed in one day. Custom gates, hillside footings, or access control integration may take two to three days. Call (833) 589-7839 for a schedule based on your project.
Brands We Service in Upland
We service LiftMaster, Linear, and Viking operators most often in Upland, along with FAAC and BFT on commercial entrances. Our trucks carry common control boards, safety edges, and remotes for these lines, which means most repairs on these brands finish the same day. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Upland, CA
| Service | Typical range in Upland |
|---|---|
| Gate repair (minor, hinge adjustment) | $95 – $190 |
| Gate repair (weld or structural) | $160 – $380 |
| Hinge replacement | $140 – $290 |
| Manual gate replacement | $750 – $1,550 |
| Electric gate repair (control board) | $180 – $340 |
| Electric gate repair (operator motor) | $290 – $690 |
| Motor replacement (basic) | $1,200 – $2,400 |
| Motor replacement (premium) | $2,000 – $3,800 |
| Automatic gate installation | $2,200 – $5,500 |
| Driveway gate installation (manual) | $1,800 – $4,600 |
| Custom gate installation | $4,500 – $8,500 |
| Gate opener installation | $550 – $1,150 |
Prices in Upland push toward the upper end of these ranges on hillside properties in 91784 where footings need more work, and on north-side tract streets where wind-rated hardware is a genuine requirement rather than an upsell. Every quote we give is fixed before any work starts. You’ll see the number in writing, agree to it, and that’s the price.
Neighborhoods We Serve in Upland
We work across all three Upland ZIP codes: 91784, 91785, and 91786. Our technicians are familiar with the older tracts near the downtown core, the newer subdivisions off Euclid, and the hillside streets where custom gates and switchback driveways change the job. Response time for most Upland calls runs same-day or next business day, depending on the season.
- North Upland and the 91784 foothill estates
- The historic downtown core and adjacent 1950s – 1970s tracts
- South Upland neighborhoods along Foothill and Arrow
- West Upland near the Claremont border
- The newer subdivisions off Euclid and Campus
Service Area – Cities Near Upland
Upland sits close to a cluster of cities where gate work follows similar patterns. We also serve San Antonio Heights, CA directly above Upland, Claremont, CA to the west, Montclair, CA to the southwest, and Rancho Cucamonga, CA to the east. If you’re outside Upland proper, call us and we’ll confirm coverage for your street.
Serving Upland, CA — Our Local Coverage Area
We’re based in the Upland area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Upland
Most Upland calls are reached the same day or next business day. If a gate won’t close and your property is unsecured, tell us when you call and we’ll prioritize the visit. Our dispatch is shortest for the flats and the central tracts.
Most standard driveway gate replacements on existing posts don’t require a city permit in Upland. New footings, moving posts, or adding an automatic operator to a property near a sidewalk may trigger review. We’ll tell you during the estimate what your specific project requires.
Yes. Many Upland HOAs, especially in the foothill and newer subdivisions, have written specs for gate style, height, and finish. We work from the HOA document and install to spec so the project doesn’t get flagged after the fact. Call (833) 589-7839 with your HOA standards and we’ll price the project accordingly.
For gate work in Upland, call Ironcrest Gate Repair at (833) 589-7839. We’ll give you a free estimate, a fixed price before work starts, and a specialist’s answer whether the fix is minor or the gate needs replacing.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Upland Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Norma Garcia"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Craig Kowalski"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
— Andres Flores