Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Chino, CA
Gate installation in Chino runs about $1,200 to $8,500 depending on whether you need a manual driveway gate or a fully automated slide system with access controls, and most jobs take one to three days from concrete pour to final programming. Ironcrest Gate Repair handles the full install: gate fabrication or assembly, post setting, operator mounting, wiring, and safety entrapment protection. Call (833) 589-7839 for a free measure and a written quote before any work starts.
Why Chino Homes Are Different
Chino is still a working agricultural and equestrian town, and that shapes almost every gate job we take here. In the 91710 core, older ranch-style homes sit on long lots with detached shops, corral fencing, and driveway gates built for horse trailers and flatbed trucks, not just passenger cars. Those gates take daily abuse that suburban HOA gates never see: livestock leaning on rails, trailer hitches clipping posts, and heavy swing cycles wearing hinge pins and operator gears down to the frame.
Toward 91708 and the Preserve, the housing shifts to newer tract and planned-community builds where HOA-style iron and vinyl gates dominate. Those jobs are different: stricter aesthetic rules, tighter setbacks, and more automation. Then there’s the climate. Hot, dry inland summers expand metal, warp wood, and bake control boards inside unventilated operator housings. Santa Ana winds rack hinges and operator arms hard enough to knock limit switches out of alignment. When winter rains finally arrive, they expose rust and footing rot on older iron and chain-link gates that held up fine all summer. A gate installer in Chino has to build for wind, heat, and daily rural traffic, not just for the day of installation.
Styles & brands we work with
Our Main Chino Services
Chino homeowners call us for two things more than anything else: fixing gates that have stopped moving and troubleshooting electric operators that behave erratically. Here’s what each service covers in Chino.
Gate Repair in Chino
When a gate in Chino drags on the ground, a hinge post leans, or a latch stops catching, we repair it on-site. On equestrian lots, that usually means straightening or re-setting posts that years of truck and trailer traffic have pushed out of plumb, welding broken iron pickets, or replacing rusted hinges before they tear out of the post. On newer Preserve-area homes, repair work tends toward sagging vinyl gates, misaligned sensors, and hardware that’s failed from wind racking. We carry hardware for ornamental iron, chain-link, vinyl, and steel tube gates, and the repair call typically happens the same day or next. See Gate Repair in Chino for the full breakdown of what a repair visit includes.
Electric Gate Repair in Chino
Chino has a lot of automated gates on both old ranch driveways and newer HOA entrances, and electric gate repair is our primary trade, not an add-on. We diagnose the actual operator in your driveway: Viking, Ghost Controls, DoorKing, and Elite are all common in this area, and each fails differently. Common Chino failures include control boards fried by summer heat, loop detectors that stop sensing the weight of a horse trailer, and remote receivers that lose signal after a Santa Ana wind event shifts the antenna. We test the full circuit from keypad to motor to safety edges and replace only what failed. See Electric Gate Repair in Chino for a detailed look at what we check on an electric gate call.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Chino
New gate installation in Chino is usually driven by one of two needs: replacing an old gate that’s been welded and re-welded past the point of safety, or putting in a first automated gate on a property where a chain-link farm gate or a couple of posts used to do the job. On 91710 ranch lots, the typical install is a heavy steel tube or ornamental iron driveway gate with an automatic slide operator sized for truck and trailer traffic. In 91708, it’s usually a lighter ornamental or vinyl swing gate that has to meet HOA specs. Either way, we measure the opening, check the ground and post footings, spec the operator, and install it as one job. See our Gate Installation page for the full installation process.
Automatic Gate Installation
Signs you need it
You’re opening and closing a heavy gate by hand multiple times a day, or your current operator is overdue for its third board replacement.
What it costs in Chino
Automatic gate installation in Chino typically runs $2,800 to $8,500 depending on operator brand, gate weight, and whether we’re running power to a new location.
How we do it
We set the gate and posts, mount the operator and track, run conduit and wiring, then program remotes, keypad codes, and safety entrapment settings before testing full cycles.
Driveway Gate Installation
Signs you need it
Your current gate is sagging, the post is leaning, or you need a wider opening for horse trailers or delivery trucks.
What it costs in Chino
Driveway gate installation in Chino typically runs $1,800 to $5,500 for a manual gate and $3,500 to $8,500 when automation is included.
How we do it
We dig and set post footings below grade, hang the gate, adjust hinges and level, then mount any operator, keypad, or safety sensor the job calls for.
Sliding Gate Installation
Signs you need it
Your driveway slopes or you have limited swing clearance, so a swing gate would drag or block the yard when open.
What it costs in Chino
Sliding gate installation in Chino typically runs $3,200 to $8,500, with the higher end reflecting poured concrete track beds and heavier commercial-grade gates.
How we do it
We pour or set the track, mount the gate frame and rollers, install the operator and rack, then wire in the safety loops that keep the gate from closing on a vehicle or animal.
What Gate Installation Costs in Chino
| Item | Typical range in Chino |
|---|---|
| Manual driveway gate | $1,200 – $4,500 |
| Automatic gate with operator | $2,800 – $8,500 |
| Sliding gate with track | $3,200 – $8,500 |
These are installed prices including labor, hardware, and standard operator programming. We quote the full amount before any work starts, so there’s no surprise line item on the invoice.
Can you install a gate on a new-build Chino lot?
Yes. New construction lots in Chino, especially in 91708 communities like the Preserve, often have bare openings with no gate hardware. We install from scratch: posts, gate, operator, and access controls, working around the builder’s existing stucco and block work.
What does gate installation include in Chino?
The standard installation includes site measurement, post setting, gate hanging, operator mounting, wiring to your panel, remote and keypad programming, and safety entrapment testing. Any concrete work, trenching, or panel modifications are quoted separately but included in the original bid.
Brands We Service in Chino
Ironcrest Gate Repair works on Viking, Ghost Controls, DoorKing, and Elite operators in Chino, among the nine brands we service across residential and commercial lines. We stock common boards, remotes, and safety sensors locally, which cuts turnaround on repair parts. See our brands for the full range.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Chino, CA
| Service | Typical range in Chino |
|---|---|
| Gate repair | $150 – $650 |
| Electric gate repair | $200 – $1,200 |
| Gate opener repair | $225 – $950 |
| Gate opener installation | $750 – $2,500 |
| Automatic gate installation | $2,800 – $8,500 |
| Manual gate installation | $1,200 – $4,500 |
| Driveway gate installation | $1,800 – $5,500 |
| Sliding gate installation | $3,200 – $8,500 |
| Safety sensor replacement | $180 – $525 |
| Control board replacement | $350 – $1,100 |
What pushes a Chino job toward the upper end: a long power trench from the house to a detached gate location, heavy ornamental iron that needs two or three people to hang safely, or an operator that has to be upsized for daily horse trailer traffic. We quote the complete price before work begins; the number on the estimate is the number on the invoice.
Neighborhoods We Serve in Chino
We work throughout both Chino ZIP codes, from the older ranch and equestrian lots in the 91710 core to the newer planned communities in 91708. Our typical response time across Chino is same-day or next-day for repair calls, with installation scheduled around your concrete and weather windows.
- The Preserve (91708)
- Central Chino ranch neighborhoods (91710)
- Chino-Corona corridor equestrian lots
- College Park area (91710)
- East Chino dairy and farm land (91710)
Service Area – Cities Near Chino
Ironcrest Gate Repair covers Chino and the surrounding communities. If you’re just over the line in Los Serranos, CA or Montclair, CA, we can usually reach you the same day. We also serve Ontario, CA and Eastvale, CA with the same gate-only focus and same upfront pricing.
Serving Chino, CA — Our Local Coverage Area
We’re based in the Chino area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Chino
Most Chino repair calls get same-day or next-day service. Installation jobs are scheduled for the next open slot, usually within the week, depending on concrete work and custom gate lead times. Emergency calls for a gate stuck open, which is a security problem on a property with horses or equipment, get priority routing.
In Chino’s newer planned communities, especially 91708, most HOAs require architectural review before a gate goes up, and some restrict materials, colors, and operator types. We’ve installed in most Preserve communities and can spec a gate that meets the HOA’s published guidelines. Check your association’s rules first, then we’ll build to them.
Yes. We cover 91708 and 91710, including the Preserve, the central ranch neighborhoods, and the agricultural lots along the east side of town. The trip charge is the same for both ZIP codes, and there’s no difference in labor rates between the newer and older parts of Chino.
If you have a gate that won’t open, an operator that’s gone erratic, or a driveway gate that’s ready for replacement, call Ironcrest Gate Repair at (833) 589-7839. We’ll give you a free estimate and a straight answer on whether to repair or replace. We service Chino’s gates, and only gates, every day.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Chino Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Greg Thompson"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Tyrone Jackson"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Carmen Martinez