Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Rialto, CA
Gate installation in Rialto means working with a specific set of conditions: clay-heavy soils that shift through wet winters, Santa Ana winds that rack gates against leaning posts, and a housing stock where many driveway gates date back to the 1980s and 1990s. Ironcrest Gate Repair has served Rialto since 2017 as a gate-only specialist, which means every call we take is about gates, not garage doors or fencing. When you’re dealing with a rusted hinge on a wrought-iron driveway gate or an operator that won’t respond after a wind event, call (833) 589-7839 and we’ll tell you straight whether it’s worth repairing or replacing.
Why Rialto Homes Are Different
Rialto sits directly at the base of the San Bernardino Mountains, where Santa Ana winds funnel through Cajon Pass and slam into the city from the north. Older wrought-iron driveway gates installed during the 1980s and 1990s bear the brunt of this: hinges loosen, gate frames rack against block pilasters, and posts that were set in expansive clay soil lean a few degrees every wet season. The Lytle Creek alluvial fan left many lots with soils that heave noticeably when winter rain arrives, then contract through the hot inland summer. A gate that swings clean in October can drag across the driveway by February. Our technicians see this pattern on nearly every older property in the 92376 ZIP, and we plan repairs around it rather than treating the symptom.
Much of Rialto’s housing stock is post-WWII and 1960s-to-1980s tract construction. Those original block-wall and wrought-iron gates were built for manual use, and many were retrofitted with electric operators long after the fact. That matters because the operator often outlasts the structure it’s mounted to. In the newer foothill developments in the 92377 ZIP, you’ll find wider lots with RV gates and decorative metal fencing, and those bring their own challenges: longer gates need heavier-duty operators, proper track alignment on slopes, and hinges that can carry the extra weight without sagging. The City of Rialto also enforces pool and driveway gate safety codes, so any replacement has to meet current requirements, not just match what was there before.
Styles & brands we work with
Our Main Rialto Services
Most Rialto homeowners call us for one of two reasons: a gate that won’t move or a gate that moves when it shouldn’t. Here’s how each works.
Gate Repair in Rialto
A swinging gate that drags on the ground or a sliding gate that jumps its track is usually a structural problem: a lean has developed in the post, a hinge has worn oval, or the gate frame itself has twisted under wind load. In Rialto, the expansive clay soils mean posts rarely stay plumb on their own, and a repair that only addresses the gate leaf while ignoring the post will fail again. We check both sides of the equation on every call. Here’s the full breakdown: Gate Repair in Rialto.
Electric Gate Repair in Rialto
Automated gates in Rialto fail in predictable ways: control boards cook in summer heat, loop detectors stop sensing vehicles, and worm gears strip when operators strain against a gate that’s binding on a shifted post. We diagnose the actual brand in your driveway, whether that’s a LiftMaster, FAAC, or Ghost Controls unit, and we don’t stand there reading the manual. Here’s what electric repair involves: Electric Gate Repair in Rialto.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Rialto
When a Rialto gate is beyond repair, or when a homeowner wants to replace a rusted 1980s wrought-iron gate with a properly engineered system, we handle the full Gate Installation from post-setting to operator programming. The job starts with an honest read on the existing structure: in Rialto, the condition of the block pilasters and the depth of the footings matters as much as the gate itself, because expansive clay will work on any new post the same way it worked on the old one. We plan for that from day one rather than setting posts and hoping.
Automatic Gate Installation
Signs you need it
You’re opening and closing the gate by hand because the old operator is dead, or the gate was never automated and you’re tired of getting out of the car.
What it costs in Rialto
In Rialto, a complete automatic gate installation typically runs $2,700 to $7,400 for the gate, operator, and labor, with brand choice and gate length swinging the price.
How we do it
We set posts below frost line, hang and balance the gate, mount the operator on a reinforced pad or post, wire the control board, and program remotes, keypad, and safety edges before testing full cycle.
Driveway Gate Installation
Signs you need it
The existing driveway gate has rusted through at the hinges, leans hard against the pilaster, or is too narrow for the vehicles you now own.
What it costs in Rialto
Expect $4,400 to $13,600 for a heavy double-leaf driveway gate with operator, depending on custom fabrications in the 92377 foothill ZIP.
How we do it
We measure the actual opening and grade, recommend a gate weight and operator class that matches your usage, fabricate or order the gate, then hang, wire, and test it under load.
Sliding Gate Installation
Signs you need it
Your driveway slopes upward from the street and a swing gate would drag, or the property line has no room for leaves to swing inward.
What it costs in Rialto
Sliding gate installations in Rialto typically run $3,500 to $9,000 before operator selection, with track length and gate weight as the main cost drivers.
How we do it
We pour a level track bed, set the track and rollers, hang the gate, mount the operator with rack and pinion or chain drive, and dial in limit switches and photo eyes.
What Gate Installation Costs in Rialto
| Item | Typical range in Rialto |
|---|---|
| Automatic gate installation | $2,700 – $7,400 |
| Driveway gate installation | $4,400 – $13,600 |
| Sliding gate installation | $3,500 – $9,000 |
Prices in Rialto run toward the upper end of these ranges on older lots where the existing posts and footings need to be pulled and replaced before new work starts, and on foothill properties where the grade forces a custom sliding or cantilever design.
How long does a gate installation take in Rialto?
Most residential gate installations in Rialto take one to two days on site once the gate is fabricated. Custom gates from fabricators typically add one to three weeks of lead time before installation. Sloping foothill lots can extend the concrete work by a day.
Do you handle the concrete and the operator wiring?
Yes, we handle the full installation: post footings, track beds, operator mounting, wiring, and programming. You’re not coordinating a concrete contractor for the pad and an electrician for the line. Call (833) 589-7839 for a written estimate before any work begins.
Brands We Service in Rialto
We work across nine major gate operator brands, and in Rialto we see a lot of Linear and Viking units on the older tract homes, plus BFT and Ghost Controls on the newer foothill builds. Because gates are all we do, our techs diagnose the actual brand in your driveway rather than treating it as a generic box. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Rialto, CA
| Service | Typical range in Rialto |
|---|---|
| Gate repair (service call + common fixes) | $150 – $500 |
| Electric gate repair | $350 – $1,600 |
| Automatic gate installation | $2,700 – $7,400 |
| Driveway gate installation | $4,400 – $13,600 |
| Sliding gate installation | $3,500 – $9,000 |
| Hinge and post repair | $300 – $750 |
| Operator replacement | $850 – $2,700 |
| Track and roller work | $250 – $600 |
What pushes a Rialto gate job higher is almost always the soil: a post that has leaned a full inch in clay means the footing has to be dug out and re-poured, which adds labor before the gate itself is even touched. Every quote we give is a fixed number agreed before work starts, so you’ll never get a surprise invoice at the end.
Neighborhoods We Serve in Rialto
We work across both Rialto ZIP codes and all of the city’s major residential pockets. Our technicians are typically in the area within one business day for scheduled work, and emergency wind-damage calls are triaged first when a security gate is left open at night.
- Las Colinas
- North Rancho Summit
- Rancho Heights
- Sunrise
- Downtown Rialto
Service Area – Cities Near Rialto
Ironcrest Gate Repair works throughout the Inland Empire, and many of our Rialto calls come from homeowners in neighboring cities with similar soil and wind conditions. We also cover Bloomington, CA, Fontana, CA, Muscoy, CA, and San Bernardino, CA.
Serving Rialto, CA — Our Local Coverage Area
We’re based in the Rialto area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Rialto
For scheduled repairs, we’re generally on site in Rialto within one business day. For wind-damaged security gates that won’t close, we triage emergency calls first and will give you a straight arrival window on the phone. Call (833) 589-7839.
Most residential gate replacements that match the existing footprint don’t need a permit, but Rialto enforces pool and driveway gate safety codes. If your gate fronts a pool or serves as a required safety barrier, we’ll make sure the replacement meets current code before install.
Yes, we handle both residential and commercial gate systems in Rialto, including multi-unit entry gates and parking access points. Our commercial work covers high-cycle brands like FAAC, BFT, and DoorKing where uptime matters more than anything else.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Rialto Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Scott Norris"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Steve Delaney"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Javier Rodriguez